Ghost 2 Immobiliser Installation
Installing the ghost 2 immobiliser is a simple and effective way to protect your vehicle against theft. It is directly connected to the vehicle's CAN data networks and is almost unnoticeable.
First, determine the source of power that is constant and a grounding point. The wires should be properly protected from electrical shorts.
Prevents theft
The Ghost 2 Immobiliser utilizes an exclusive PIN code sequence that's created by using the existing electronic buttons on your steering wheel or centre console to ensure that only you can start your vehicle. Even if thieves manage to copy your keys or hack into the system of your car it will not be able to start the vehicle. It's also completely inaccessible to anyone trying to use it and you can be sure that no one will be aware that you've added a layer of security.
Another reason that it is so effective in protecting against theft is the ability to shut down your engine, even if a burglar has managed to get in. This is accomplished through the use of an additional device, called the Shadow, which connects to your car's CAN data network and does not communicate over radio frequency, making it difficult for thieves to find or alter. The Shadow can also be linked to the vehicle's tracking/paging system permitting you to track its movements. It has an output which can be used to activate the siren if someone attempts to take it.
It is vital to be in a well-lit area when working with wiring to aid in identifying the correct wires and avoid any accidental disconnections or short circuits. It is also essential to double-check and test the connections, and to insulate the wiring to protect it from the elements. It is also recommended to use cable tie-ups to bundle and secure the wires, which will enhance their appearance and reduce the chance of them becoming dislodged during driving.
It's recommended to mark the CAN H and CAN L wires using pieces of tape or labels, as the wrong location could cause a power surge which damages the immobiliser. It's also a good idea to test the power source and grounding point with an instrument to ensure that they are providing a steady 12V supply and a solid grounding.
Simple to use
Ghost immobilisers are an excellent way to protect your vehicle from theft. It prevents key cloning, ECU swapping and other security threats and can be linked with an iPhone app for easy management and monitoring. The app will also send alerts when your vehicle is compromised. The app can also assist you to locate your vehicle in the event that it is stolen.
The Ghost immobiliser is subtle and does not require any special equipment to function. It is connected to the CAN system in your vehicle and programmed with an individual PIN code. You can activate it with the series of buttons on your dashboard, steering wheel, or the WeCar app. The code must be entered to start the engine, so thieves aren't able just to turn on your vehicle and leave.
Installing a ghost ignition system is a straightforward process, but it is important to follow the directions carefully to ensure that it is a seamless integration with your vehicle's current systems. The first step is disconnection of the battery. This will prevent accidental airbag deployment and also ensure safety. It's also crucial to work in a well-lit location to ensure that connections are precise and avoid making mistakes. It is also essential to employ appropriate soldering techniques or top-quality connectors to ensure a secure and reliable connection.
The CAN H wire as well as the CAN L wire are required to connect your Ghost immobiliser to the wiring of your vehicle. With a wiring diagram for your vehicle determine these wires and locate a suitable location to connect them. It's also helpful to label these wires with labels or tape so you can easily identify them when you install.
After the connections have been established, it's a good idea to check the immobiliser to make sure it's working properly. It's also recommended to test the Transport Mode, which disables the Ghost system and lets you temporarily turn off your security features. ghost immobiliser review is especially useful in situations like servicing or transportation of vehicles. This feature is particularly useful if you have an older vehicle that needs its battery to be isolated for servicing.
Low-profile
Ghost immobilisers are the ideal way to stop theft from keyless entry vehicles and vans. It works by capturing the signal from your vehicle's original remote and forming an obstacle that thieves are unable to breach without the correct PIN code. It's a discreet and reliable way to protect your car and is even recommended by insurance companies to lower monthly cost. It's a low-profile, hidden system that can be located in your car's buttons. It doesn't feature LED indicators and is therefore almost unnoticeable by thieves.
The Ghost immobiliser, unlike other security systems is connected to the CAN data network of your vehicle, not a remote control. The device is tamper proof and thieves cannot disable it by cutting the wires. This makes it difficult for thieves to steal your car. It's also an excellent alternative for older vehicles that don't have a keyless entry system.
Installing a ghost immobiliser is simple if you have the right tools and materials. You'll need a few basic hand tools as well as a multimeter to test electrical values, as well as cable ties or insulation tape to ensure that your connections are secure and well-insulated. Before starting the engine, you must disconnect your battery and be sure that all wiring is neatly tied. This will stop thieves from tampering with it.
If you're not comfortable with doing your own immobiliser installation, you can find an auto shop near you to complete the task for you. They'll handle the entire process starting with the initial inspection right through to the installation. If something is not working, they'll offer a warranty. They'll be in a position to answer any questions you may have about the immobiliser, and assist you in deciding whether it's the right option for your vehicle.
The Autowatch Ghost 2 is a smart immobiliser that integrates directly with the ECU of your car. This can help protect you from key cloning, hacking, and relay attacks that are common among modern vehicles. It is TASSA-certified and offers the best theft protection, so you can drive with confidence.
TASSA verified
The Ghost immobiliser system is among the most effective methods to safeguard your vehicle from theft. It connects to the car's CAN data network and uses it to prevent the engine from starting without a unique PIN code. The system is not detected by thieves, making it a great alternative to an alarm for your car. You can change your PIN code at any time and only you know it. This guarantees the security of your vehicle.
A TASSA certified installer will complete the installation of Ghost Ghost system in a couple of hours at your home or at your place of work. You will also receive a free emergency card, installation certificate, and owner's manuals. They will also demonstrate the equipment to you and ensure that you are pleased with the service.
The Ghost unlike other immobilisers, is able to connect directly to the CAN data network of your vehicle. This lets it be installed without cutting any wires. It's also extremely quiet, making it very difficult to be detected by thieves. The system comes with a unique and reversible PIN code, which you enter by pressing buttons on the dashboard or wheel. This prevents anyone from starting your car, even if they have your key fobs.
When you're ready to install a ghost 2 immobiliser, you should begin by disconnecting the battery. This will stop any airbag deployments or short circuits in the process. After the battery is removed, it is important to adhere to the user's manual's instructions for connecting the immobiliser. Use online resources to find additional information specific to your model.
Upon completion, you should check the immobiliser to ensure that it works correctly. You can perform this by entering the PIN code and then trying to start the vehicle. After this, you should regularly check regularly to ensure that the immobiliser is working correctly. This will help you spot any issues early so that you can resolve them quickly.